This machine looks good. The chassis is plastic though it can fool you into thinking it's aluminum. When I set out to remove the top, I was shocked to find out that the "chassis" is not bolted on, rather snapped into the metal bottom! Not a screw! You should take care bending the fragile plastic!
此機外形漂亮，但看似鋁的機殼是塑膠，且容易花。最離譜的是，機殼與金屬機身是扣上的 （用右方的母扣和左方的公扣），沒用一顆螺絲。拆除的時候要小心。
Half the internal space is occupied by the mechanism. The rest is divided between the ubiquitous switch-mode power supply and the small main board stuffed with surface mount components.
機内光頭佔了 1/2 的位置；簡單的 Switch Mode 電源 1/4；主綫路板 1/4，全 SM 零件。
The main board had a metal piece silicon-glued to the main IC. I guess this facilitates heat dissipation and perhaps also performs shielding duties. I did not remove it to look under.
主綫路板上鎖了個金屬片，中心陷下去的地方是用來散熱的，粘在 IC 上，故此沒法拆除，不能看清楚下面。
The sound is crystal clear. report later.
聲音初步印象比較高清，但絕對不差，稍后會和 DVP-PR50P 比較。
Dr John, thanks for your information and awaiting your comparison report. My DVP-PR50P served as transport which is as good as my Sony XA-50es except that no display was built.
ReplyDelete